COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
Install only runs on MS-DOS or PC-DOS versions 3.20 or later.
Change Disk
Please insert the diskette labeled '%s' in drive %s.
%s(%d) : Expected component name : The name '%s' was not listed in the product's component list.
Install
Version 1.01
Component, %s, has already been added to the product's component list.
%s(%d) : The malloc() request for memory failed.
The version number for component %s does not match the version number specified in the product's component list.
The revision number for component %s does not match the revision number specified in the product's component list.
The status for component %s does not match the status specified in the product's component list.
The status sequence number for component %s does not match the status sequence number specified in the product's component list.
The drive type for drive %s cannot be determined.
%s(%d) : Error : The component '%s' was not found on the source drive.
%s(%d) : Error : Label, %s, already exists.
(Required)
Select the components you wish to install
Enter a directory path used for temporary files.
PATH = %s : The specified directory could not be found.
While trying to copy file '%s', a request was made for the next diskette containing the component '%s', but location information indicates that there are no more diskettes containing the component.
A request for disk number %d was made, but this disk was not listed in the Location section of the .PSF file.
The component, %s, was listed in the location section of the .PSF file but not in the components section.
The file, %s, was not found.
Location information was expected for a component listed in the COMPOSITION section of the .PSF file. Verify that all components in the COMPOSITION section are listed in the LOCATION sections.
INTERNAL ERROR! Location information was found when it was expected to be empty. Call Novell to report this error.
INTERNAL ERROR! Prompt information was found when it was expected to be empty.
%s(%d) : Syntax Error : %s
The component name registered in the component() statement of this .CPF file is '%s'. This does not match the filename, which is '%s'.
Syntax Version Error: Version %d.%d is not supported. The syntax version should be %d.%d.
%s(%d) : Error : %s
%s(%d) : Version Error : The Major and Minor version numbers can only have values in the range 0 - 99. The current value is %d.%d.
Source: %s. Target: %s. The source filename is a directory or a sharing violation occured.
Source: %s. Target: %s. One of the files is locked.
Source: %s. Target: %s. The target file contains wild card characters, or the source and target files are the same file.
Source: %s. Target: %s. The source file is a directory.
Source: %s. Target: %s. Too many files are open.
Source: %s. Target: %s. The source file does not exist or the target directory does not exist.
Source: %s. Target: %s. There is no space left on the target drive.
%s(%d) : Error : '%s' is undefined.
%s(%d) : Internal Error! : ID type requested (%c) is an invalid type.
%s(%d) : Redefinition Error : %s
Only a status of 'Alpha' or 'Beta' is allowed to have a numeric sequence number.
Status must be either 'Internal', 'Alpha', 'Beta', or 'Retail'.
%s(%d) : Syntax Error : '%s' is unexpected.
%s(%d) : Only one storage class allowed per identifier
%s(%d) : Only one storage type allowed per identifier.
%s(%d) : Error : %s : Identifier type is incorrect for this operation.
%s(%d) : Unexpected End Of File
Product Identifier must be 8 characters or less.
%s(%d) : %s : Component identifiers must be 8 characters or less.
%s(%d) : Syntax Error : %s : Too few actual parameters.
%s(%d) : Syntax Error : %s : Too many actual parameters.
%s(%d) : Function %s() : Different types : Parameter %d.
%s(%d) : Error : There is at least one void operand in the expression.
%s(%d) : Syntax Error : An 'if' statement was not terminated before End Of File.
%s(%d) : INTERNAL ERROR : The processing flag was turned off at the End Of File. Call Novell to report this message.
%s(%d) : Function %s() : Illegal type '%c' : Parameter %d.
ALT-F1
Scroll this line.
%s(%d) : Range Error : %s -- Valid range is from '%s' to '%s'.
No drive present.
There are no local disk drives or network drives available for installation.
Substed drive.
Ramdisk drive.
Network drive.
%s(%d) : Subscript Range Error : The legal range for subscripts on identifier '%s' is 0 to %d. The subscript value %d is out of range.
ALT-F10
Exit to DOS
Move to the very begining.
Move to the very end.
ENTER
Backspace
Delete to left of cursor.
The correct format for an IP Address is 'n.n.n.n' where 'n' is a decimal number from 0 to 255 or a hexadecimal number from 0x00 to 0xFF.
IP Address Range Error : %s : %s
IP Address Format Error : %s : %s
An attempt was made to add a line to the status portal. The status portal has not been initialized.
Checking free memory.
Selecting components.
chdir
chmod
copy
delete
mkdir
rename
rmdir
rmdir -r
%s(%d) : Iteration Control Error : An attempt was made to locate the beginning of a 'while' or 'do while' loop, but no loop was active at the time.
%s(%d) : Error '%s' : Assignment was made to a constant or constant identifier.
The Product Specification File (.PSF) could not be found on the install drive.
More than one Product Specification File (.PSF) was found on the install drive. Only one is allowed.
%s(%d) : Error : The list of diskettes in the LOCATION section of the Product Specification File (.PSF) is not in sequence.
%s(%d) : Error : Identifier '%s' is not an array type.
%s(%d) : Error : The identifier types are invalid for this operation.
%s(%d) : Error : Illegal assignment.
%s(%d) : Parameter Value Error, parameter %d : The parameter value is illegal for this function.
%s(%d) : Parameter Error : Function %s() : Parameter %d : Parameter is not an identifier.
%s(%d) : GetProfileString Internal Error : The pointer to the next element to be loaded into the target variable is pointing to a NULL value. It was expected to point to a character string.
Set the flags indicating which components should be installed. When done, press <esc> to continue.
Install needs to create some temporary files. Enter a directory to use for temporary files.
Edit Parameter Value
Edit %s Driver Parameters
The value must be between %x and %x.
The value must be between %lx and %lx.
%s : Default %s
Select the driver or drivers you wish to install
Edit NET.CFG Parameters for: LINK DRIVER
Toggle selection of highlighted item.
Directory '%s' not created. The path includes the name of an existing file or device.
Directory '%s' not created. The path includes a component which cannot be found or created.
%s(%d) : Drive %s : Drive does not exist.
Installation successfully completed.
Installation in progress...
No more drivers
Select the driver you wish to install
Configuring:
install:
Do you want Install to create this directory?
Specify the interrupt setting for the selected network board.
Specify the port setting for the selected network board.
Specify the memory setting for the selected network board.
Specify the DMA channel for the selected network board.
Indicate the number of the expansion slot where the selected network board is installed.
The driver will select this value. Press <return> unless you plan to administer local addresses.
Select the frame type to be used by TCP/IP.
%s(%d) : Invalid Drive Type %4.4x : The drive is not a Floppy Disk, Fixed Disk or Network drive.
Error : Install attempted to create a temporary directory on a drive with at least %ld Kb free, but could not.
Write fault on [%s:]
Read fault on [%s:]
General failure on [%s:]
Abort
Ignore
A bad memory image of the File Allocation Table (FAT) was detected.
Write protect error on drive %s:
Unknown unit error on [%s:]
Drive not ready error on drive %s:
Unknown command on [%s:]
Cyclic-Redundancy-Check (CRC) error in data on [%s:]
Bad drive request structure length on [%s:]
Seek error on drive %s:
Unknown media type on [%s:]
Sector not found error on drive %s:
Out of paper error on [%s:]
Retry
Unknown error on [%s:]
Your selection does not have sufficient free space.
Insufficient Space
Proceed anyway.
Make another selection.
Choose to proceed with your current selection or make another selection.
Select the destination drive for installation.
%s(%d) : Error : Newline character in string is not allowed.
NET.CFG settings for the ODI driver %s
* None of these
Select the drive your workstation boots from.
Source: %s. Target: %s. The target drive is write protected.
%s(%d) : Parameter %d : The requested parameter is not available or the configuration database is not initialized.
Configuration database error : The requested entry, %s, was not found and there is no default entry available. Contact your system administrator.
Configuration database error : A substitution value for the entry '%s' was not found. Contact your system administrator.
Configuration database error : The configuration database file, '%s', could not be found. Contact your system administrator.
Configuration database error : A log file was not specified in the configuration database file, %s. Contact your system administrator.
Configuration database error : An unknown error occured while processing the configuration database file %s.
(.txt)